Concrete Screw - Galv M12 x 100

Enquire

Concrete Screw - Galv M12 x 100

SKU: 49-BS12

Used for installing Surface Mount bollards onto concrete surfaces.

4 screws required per bollard.

Instructions:

  1. Drill 12mm dia hole into concrete (hole must be 25mm deeper than fixing penetration)
  2. Clear out dust
  3. Tighten screw with socket or impact driver

* If resistance is experienced when tightening, unscrew the fastener one turn then re-tighten. Ensure you do not over tighten.

49 BS12 Concrete Screw for Bollards Galv M12 x 100
49 BS12 Concrete Screw for Bollards Galv M12 x 100
NZ Owned and Operated
© Copyright 2021 Vanguard | Site Map | Site by Mondo | 0800 500 147 | sales@vanguardgroup.co.nz | Terms & Conditions