Rubber Wheel Stops – 1650mm.
CODE:49-RWS
Rubber Wheel Stops help protect structures from vehicle damage and prevent vehicles from encroaching into pedestrian areas. They help to keep vehicles within designated parking areas and protect surrounding property. Commonly used in carparks, supermarkets and shopping malls.
- Complies with AS/NZS 2890.1:2004
- Hi-vis chevrons for enhanced visibility
- One-person lift for easy installation – 16kg
Options
Downloads
Options
Image
Code
Description
Size
49-RWS-BY
Rubber Wheel Stop Black/Yellow
1650(L) x 150(W) x 100(H)
49-RWS-B
Rubber Wheel Stop Black
1650(L) x 150(W) x 100(H)
49-FR12
Fasteners into Bitumen
M12 x 300mm Spike
49-CF12150
Fasteners into Concrete
M12 x 150mm Concrete Screw
49-BCA
Bondurox Super C Adhesive - used to fasten onto concrete where physical penetration is not allowed. 1 tube per 2 wheel stops.
600gm Tube
Downloads
FAQs.
Can I use these wheel stops for heavy vehicles (such as trucks and buses) should I be using adhesive when installing these? (question applies to all wheelstops)
We would recommend either our standard 1650mm rubber wheelstops or our 900mm rubber wheelstops, with one for each wheel. The reason behind this is these have 3 fasteners per stop, and you can place the middle fastener hole right in front of the wheel, making it a much stronger solution. Alternatively, traffic separator in a straight line, if all the car parks are straight.
Using adhesive is not mandatory in most situations. You can use this for extra longevity in both concrete and asphalt surfaces if you wish.
When surfaces cannot be pierced by a physical fastener, you can use adhesive on its own when properly applied (see application guide). The benefit of our Bondurox adhesive is the elasticity once it is set which leads to a longer life, i.e. when the wheelstop is impacted, it won't snap the wheelstop off the ground.
Can I install these onto pavers?
If the pavers are thick then a M12x150 concrete screw should work – they need to check that it doesn’t crack.
If the paver looks like it will crack then drill the hole out to 16mm clearance hole and drive a spike through and into the base course below.
Glue added to further assist.
Featured Projects.
Recent projects the Vanguard team have worked on.
Our client needed to keep pedestrians from walking on a busy road that had trucks and other vehicles travelling along it. The public were jaywalking across the busy road creating a safety risk.
You may also be interested in
CODE: 49-RWS-18
Our Recycled Rubber Wheel Stops are ideal for protecting structures from vehicle damage and preventing vehicles from encroaching into…
CODE: 1516
The Soppec Line Marker System is an easy, convenient and cost effective way to keep your lines fresh and up…
CODE: 49-SPS
The Steel Pallet Stopper is typically used in conjunction with our barrier or handrail system for stopping pallets from hitting or damaging assets.
CODE: 49-SH50
Rubber Speed Humps are ideal for slowing vehicles to a safe speed in car parks and private roadways. Suitable for…
What our clients are saying.
Hear what our customers have to say about working with Vanguard to get their safety projects completed.
