Steel Barrier – 610 Double.
CODE:
Our Steel 610mm high double rail barrier is a certified steel safety barrier system used for traffic management and protecting against forklift damage to buildings and assets. Double rail offers more protection and a higher strength rating.
Not recommended for walkways due to its lower height.
Modular system can be configured to your required site layout.
Post centres of 1.1m ensure that every impact is absorbed by a post.
The 610mm high double rail stops 7T at 7.4km/h.
Compliant with AS/NZS 1170.1 Section 3.8. (Certification available by request).
Can be installed with pedestrian handrail mounted to barrier.
Options
Spec Sheets
Rating Table
Options
Image
Code
Description
610-2
Steel Barrier 610mm High - Double
610-2H
Pedestrian Handrail
Spec Sheets
Rating Table
FAQs.
What is the ideal application for Steel barrier?
Our Steel barrier is perfect for any application where you need to keep people safe from forklift or vehicle operating areas
Can access to a safe crossing area be allowed for?
Yes. Our Steel pause gates are perfect for allowing access to a safe crossing area. Pause gates can be fitted anywhere along the length of the barrier.
Is Steel barrier customisable for my layout?
Absolutely. Our Steel barrier is a very flexible system, so we can adapt to suit your layout.
Is Steel barrier able to withstand a vehicle hit?
Yes. Various height and guard rail options are available to suit your application, ask us for the best option for your needs.
Can Steel Barrier be bolted to asphalt?
No, our Steel Barrier must be bolted to concrete, so if the existing surface is asphalt, you will need to excavate and pour concrete footings to install the barrier onto. Concrete footers need to be a minimum of 25MPA and 400mm wide x 300mm deep. If you would prefer to install individual footers for each post, these need to be a minimum of 400(L)x400(W)x300(D)mm per post.
You may also be interested in
CODE: DFVBD
Th d-Flexx Dual Barrier uses double vehicle beams for protecting assets in high traffic areas where large vehicles are present.
CODE: 910-2
The 910 high double rail offers more protection and a higher strength rating than the single rail units, the bottom rail can be placed at ground level for protection against fork tines.
CODE: DFJU-80
The d-flexx Self-Closing Gate creates pause points along walkways to guide pedestrians and stop people from abruptly stepping out in to active areas.
CODE: 49-FS950D
With a triple steel barrier rail configuration at 950mm high and a handrail extension, the ForkSafe 950-C provides heavy-duty impact…
What our clients are saying.
Hear what our customers have to say about working with Vanguard to get their safety projects completed.
