d-flexx Energy Absorbing Bollard.
CODE:
d-flexx Bollards are certified, shock-absorbent and highly impact-resistant safety bollards.
Surface mounted to concrete, these bollards are easily installed to provide instant high-quality protection to structures and equipment from damage from light vehicles and machinery.
Non-conductive properties make this an excellent choice for protecting electrical assets such as transformers and power boxes.
- Absorbs energy on impact then returns to its original shape
- Made from a flexible, impact-resistant PE polymer
- 100% recyclable, UV-resistant and suitable for indoor and outdoor use
- d-flexx Energy Absorbing Bollards stop 2T at 5.1km/h
- PAS13 compliant, and tested and certified by German TÜV NORD (DIN EN 1512) to exceed AS/NZ 1170.1:2002 Section 3.8 (Type G).
- Can be used in temperature ranges from -40° up to + 50°.
- Supplied with 8 x M12x80mm Anka Screws
View the full d-flexx family and case study here
Options
Videos
Spec Sheets
Rating Table
FAQs.
Where are these best used?
These can be used inside and outside, and are food grade rated for use in food processing applications. Non-conductive properties make this an excellent choice for protecting electrical assets such as transformers and power boxes.
How do these work?
During impact, the material bends while absorbing energy and then returns to its original shape
How are these installed?
Surface mount bollards are fixed onto the surface using concrete screws.
Can the d-flexx Energy Absorbing Bollard be bolted onto asphalt?
No, the d-flexx Energy Absorbing Bollard must be bolted to concrete. If the existing surface is asphalt, you will need to excavate and pour concrete footings to install the bollards onto. Concrete footers need to be a minimum of 25MPA and 400(L) x 400(W) x 400(D)mm.
Are these suitable for inside and outside use?
Yes, d-flexx products are UV resistant so are suitable in all weather conditions.
How far apart should I install the bollards?
We recommend installing your bollards between 1200mm - 1500mm apart to ensure no small vehicles can fit between them. 1200mm is the minimum distance apart they can be installed to ensure access is not restricted.
You may also be interested in
CODE: 49-SSB
Stainless steel bollards offer a high level of protection and are particularly applicable in areas where painted surfaces may be scratched…
CODE: DFBO50-10
The d-Flexx bollard is easily installed to provide high quality protection to structures and equipment against damage from light vehicles and machinery.
CODE: DSZ-EHD
Designated Driver Safe Zones provide a safe place for visiting drivers to stand clear when vehicles are moving or being…
CODE: DFVB+
The d-Flexx Mono Plus Barrier uses a single vehicle beam and three pedestrian rails to make the ideal barrier for high-traffic areas shared between pedestrians and low mass vehicles.
What our clients are saying.
Hear what our customers have to say about working with Vanguard to get their safety projects completed.
