d-flexx Dual Barrier.
CODE:
d-flexx Dual Barrier is a certified, shock absorbent and highly impact resistant safety barrier.
Double vehicle beams make this the ideal solution for protecting assets in high traffic areas where large vehicles are present.
- Absorbs energy on impact then returns to its original shape
- Made from a flexible, impact resistant PE polymer 100% recyclable, UV-resistant and suitable for indoor and outdoor use
- Stops 5T at 8.8km/h
- PAS13 compliant, and tested and certified by German TÃœV NORD (DIN EN 1512) to exceed AS/NZ 1170.1:2002 Section 3.8 (Type G)
- Can be used in temperature ranges from -40° up to + 50°
- Supplied with M12x80mm Anka Screws
View the full d-flexx family and case study here
Options
Videos
Spec Sheets
Rating Table
Options
Image
Code
Description
DFVBD
d-flexx Dual
Videos
d-flexx Barrier | Impact Test
d-flexx Barrier | Installation Guide
d-flexx Barrier vs Steel Barrier | Impact Test
Spec Sheets
Rating Table
FAQs.
Can the d-flexx Dual Barrier be bolted onto asphalt?
No, the d-flexx Dual Barrier must be bolted onto concrete. If the existing surface is asphalt, you will need to excavate and pour concrete footings to install the barrier onto. Concrete footers need to be a minimum of 25MPA and 400mm wide x 300mm deep. If you would prefer to install individual footers for each post, these need to be a minimum of 400(L) x 400(W) x 300(D)mm per post.
You may also be interested in
What our clients are saying.
Hear what our customers have to say about working with Vanguard to get their safety projects completed.
